Edimax Pro GS-5208PLG V2 - Switch - smart - 8 x 10/100/1000 (PoE+) + 2 x 1000Base-X SFP - rack-mountable - PoE+ (160 W)

Kategorija: Upravljivi switchevi
Šifra: GS-5208PLG V2
Proizvođač: Edimax Technology
Garancija: Nepoznato
Ilustrativne prirode.
Zaliha Količina Dostava predviđena Cijena
PDV
INFES 1 5.6.2024. ~ 4 tjedna 124,44
DE712 3 14.6.2024. ~ 4 tjedna 154,50
DK773  1  21.6.2024. ~ 4 tjedna 169,36

Opis proizvoda

The Edimax Pro GS-5208PLG is a web-smart switch with 8 Gigabit PoE+ and 2 Gigabit SFP slots. Designed for medium to small network environments, its standard 19-inch 1U rack-mount brackets allow for integration with the most widely used mounting systems on the market. The Edimax GS-5208PLG is a superb choice to boost your network environment's performance and efficiency.

Ključne prednosti

  • IEEE 802.3af/at PoE compliant
  • Eight Gigabit Ethernet ports
  • Up to 30W per port (total power budget: 160W) for powering PoE-enabled devices
  • Auto-detection of powered devices (PD) and power consumption levels
  • Auto fault-detection on over/under current and voltage
  • Switch capacity: 20Gbps and forwarding rate: 14.88Mpps
  • IEEE 802.1Q-based VLAN for network segmentation to improve performance and security
  • IEEE 802.1p QoS with 4 priority queues
  • IGMP Snooping V1 / V2 / V3 support
  • 4K MAC address table and jumbo frame support up to 9KB
  • 19-inch 1U rack-mount brackets included

Mogućnosti proizvoda

  • IEEE 802.3at/af Power over Ethernet Standard
    The GS-5208PLG features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port, and has a total power supply of 160 W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5208PLG is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable. The GS-5208PLG can be used with different PoE products such as access points, network cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.
  • PoE for easy installation and better cost efficiency
    Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords or electrical outlets on the walls and ceiling. Overall the GS-5208PLG can lower installation costs and simplify the deployment effort.
  • Power-budget user interface for PoE device management
    The GS-5208PLG features an innovative power-budget UI (user interface) which allows IT managers to monitor the power consumption of each PoE port and the total power consumption of connected PoE devices. Monitor the entire PoE network and assess the total power usage before adding new PoE devices to the network architecture. The power-budget UI also features a remote on/off function for each PoE port, so manual plug/unplug isn't necessary when a PoE device hangs. Simply use the remote power button to quickly reset the device.
  • Smart tools for improved network efficiency
    The GS-5208PLG features smart network monitoring tools that allow for improved network efficiency. Security and management features include bandwidth control and VLAN (IEEE 802.1Q VLAN). Using its web-based interface, administrators can set up VLANs to segregate traffic and configure link aggregation settings to create fat traffic pipelines. Additionally, these features offer extra protection on the network edge and the password-protected configuration interface can be accessed remotely.

Product Description
Edimax Pro GS-5208PLG V2 - switch - 8 ports - smart - rack-mountable
Device Type
Switch - 8 ports - smart
Enclosure Type
Rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
8 x 10/100/1000 (PoE+) + 2 x 1000Base-X SFP
Power Over Ethernet (PoE)
PoE+
PoE Budget
160 W
Performance
Switching capacity: 20 Gbps ¦ Forwarding performance: 14.88 Mpps
Capacity
VLAN IDs: 4096 ¦ Virtual interfaces (VLANs): 8
MAC Address Table Size
4K entries
Jumbo Frame Support
9.2KB
Remote Management Protocol
HTTP
Features
Flow control, VLAN support, IGMP snooping, store and forward, Broadcast Storm Control, full duplex mode, ACL support, QoS, reset button, LACP support, 192KB packet buffer, tagged VLAN, port trunking
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3at, IEEE 802.3az
Power
AC 100-240 V (50/60 Hz)
Dimensions (WxDxH)
26.5 cm x 18.4 cm x 4.4 cm
Weight
1.7 kg
Device Type
Switch - 8 ports - smart
Enclosure Type
Rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
8 x 10/100/1000 (PoE+) + 2 x 1000Base-X SFP
Power Over Ethernet (PoE)
PoE+
PoE Budget
160 W
Performance
Switching capacity: 20 Gbps ¦ Forwarding performance: 14.88 Mpps
Capacity
VLAN IDs: 4096 ¦ Virtual interfaces (VLANs): 8
MAC Address Table Size
4K entries
Jumbo Frame Support
9.2KB
Remote Management Protocol
HTTP
Features
Flow control, VLAN support, IGMP snooping, store and forward, Broadcast Storm Control, full duplex mode, ACL support, QoS, reset button, LACP support, 192KB packet buffer, tagged VLAN, port trunking
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3at, IEEE 802.3az
Status Indicators
Power, PoE, link/activity
Interfaces
8 x 1000Base-T RJ-45 PoE+ - 30 W ¦ 2 x 1000Base-X SFP
Power Device
Internal power supply
Voltage Required
AC 100-240 V (50/60 Hz)
Rack Mounting Kit
Included
Compliant Standards
FCC Class A certified, RoHS
Width
26.5 cm
Depth
18.4 cm
Height
4.4 cm
Weight
1.7 kg
Min Operating Temperature
0 °C
Max Operating Temperature
40 °C
Humidity Range Operating
10 - 90% (non-condensing)
Min Storage Temperature
-40 °C
Max Storage Temperature
70 °C
Humidity Range Storage
5 - 90% (non-condensing)