Description du marché

LinkIQ est capable de mesurer des longueurs allant jusqu'à 305 m et fournit la distance des problèmes tels que les circuits ouverts, les courts-circuits et les câbles sans terminaison. L'adaptateur distant MS-IE permet d'identifier les couplages mal câblés et les dépairages sur les câbles avec terminaison RJ45, M12X, M12D et M8D.
LinkIQ prend en charge Ethernet/IP, PROFINET, EtherCAT et d'autres protocoles Ethernet industriels et qualifie la bande passante du câblage de 10BASE-T à 10GBASE-T (de 10 Mo/s à 10 Go/s) et fournit également les diagnostics du commutateur le plus proche, y compris le débit de données affiché, le nom du commutateur, le numéro de port et les informations VLAN, ainsi que des tests du PoE et de la charge jusqu'à la Classe 8 (90 W).

Arguments de vente clés

• Validez les performances de câble jusqu'à 10GBASE-T pour Ethernet/IP, PROFINET et EtherCAT
• Obtenez le débit de données du commutateur connecté, le nom du commutateur, le numéro de port et le VLAN
• Détectez la classe PoE (1-8) et l'alimentation, puis effectuez un test de charge
• Effectuez les diagnostics de câble, notamment la longueur
• Gérez les résultats et imprimez les rapports à partir du PC LinkWare

Caractéristiques du produit

• Cable testing you trust
  The LinkIQ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the Industrial Ethernet Remote Adapter allows for a complete wire map of the cable pairs which helps identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ supports EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It qualifies the cabling bandwidth by taking multiple frequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
• Network testing you need
  Along with the robust cable testing features, the LinkIQ also provides detailed information on the nearest connected switch. The LinkIQ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info.
• In-depth PoE testing
  While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term "PoE" is not registered and there are a variety of non-standards-compliant implementations as well. To simplify PoE installation and troubleshooting, the LinkIQ displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure.
• LinkWare documentation
  The LinkIQ provides complete documentation for the tests it performs. Up to 1,000 results can be stored in the tester with descriptive names and recalled. Test names and numbers automatically increment as each is saved ("Annex B-1", "Annex B-2", "Annex B-3", etc.) saving lots of time when testing cables in sequence. Report data may be exported to a PC for documentation purposes. The LinkIQ uses LinkWare PC, Fluke Networks' reporting software which supports a variety of testers going back 20 years and is the industry's de facto reporting solution with tens of thousands of active users. LinkWare can be used to store the results as well as generate PDF reports.