Klíčové vlastnosti

• Compact performance meets modern design
• Ultimate Performance thermal paste
• Fan optimized for heat sinks
• Improved installation and unlimited RAM clearance
• Make your system shine

Funkce produktu

• Compact performance meets modern design
  Optimized performance meets modern design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.
• Ultimate Performance thermal paste
  The Freezer A35 RGB comes with a 0.8 g syringe of the MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.
• Fan optimized for heat sinks
  The fan installed in the Freezer A35 RGB benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focused air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.
• Improved installation and unlimited RAM clearance
  The Freezer A35 RGB is a socket-specific installation variant for AM4. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer A35 RGB. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.
• Make your system shine
  The Freezer A35 A-RGB fan has 12 analog RGB LEDs in the fan hub. These are uniformly controllable and compatible with the common RGB standards of leading motherboard manufacturers. The fan can be connected directly via a 12 V 4-pin RGB header on the mainboard. Alternatively, the cooler can also be illuminated via an external Controller and synchronized with the lighting of other hardware.