The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 30.5 m (100-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required.Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 15 m (50-ft.) from the source, or a 1024 x 768 @ 60Hz signal up to 30.5 m (100-ft.).
Osalla tuotteista kaupassamme on erikoisehdot. Tilaamalla tuotteen hyväksyt, että tuotteella saattaa olla rajoitettu takuu tai muita yllä mainittuja ehtoja
Tätä tuotetta ei ole sallittua ostaa. Ole hyvä ja ole yhteydessä omaan ITosastoosi lisätäksesi tuotteen sallittujen tuotteiden joukkoon.