Маркетинг описание

Remote UPS management enables management of your UPS by connecting it directly to the network. Attach the device to an emergency power off (EPO) system so that power can be turned off in an emergency situation. Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter provides actual kilowatt hours of usage for energy conscious users. Intuitive LCD interface provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys. UPS recognizes when external battery packs are attached and automatically adjusts runtime. Multiple outlet groups may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding.

Ключови точки за продажби

• Remote UPS management
• High online efficiency
• Green mode
• High frequency design
• Energy meter
• Intuitive LCD interface
• Auto recognition of external batteries
• Multiple switched outlet groups
• Pure sine wave output on battery
• Preinstalled network management card
• Scalable runtime
• Cold-start capable
• Plug-and-Play external batteries
• SmartSlot
• Temperature-compensated battery charging

Характеристики на продукта

• Remote UPS management
  Enable management of your UPS by connecting it directly to the network.
• EPO
  Attach the device to an emergency power off (EPO) system so that power can be turned off in an emergency situation.
• Green mode
  Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Energy meter
  Provides actual kilowatt hours of usage for energy conscious users.
• Intuitive LCD interface
  Provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys.
• Auto recognition of external batteries
  UPS recognizes when external battery packs are attached and automatically adjusts runtime.
• Multiple switched outlet groups
  Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding.
• Pure sine wave output on battery
  Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Scalable run time
  Scalable run time allows additional run time to be quickly added as needed.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Network manageable
  Provides remote power management of the UPS over the network.
• Audible alarms
  Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Hot-swappable batteries
  Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
• Predictive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Resettable circuit breakers
  Enable a quick recovery from overload events.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance.