MikroTik cAP XL ac - Borne d'accès sans fil - Wi-Fi 5 - 2.4 GHz, 5 GHz

Code du produit RBcAPGi-5acD2nD-XL
Marque MikroTik
Garantie 15 Mois
Pour but illustratif seulement
Grossistes Quantité de stock disponible Date de livraison estimée Prix
TVA
JCBWX2 30 07/05/2026 ~ Date Appro. inconnue 98,40
DK773 5 04/05/2026 ~ Date Appro. inconnue 122,84

Description du marché

Need a nice-looking access point that won't get in your way? Or perhaps you're managing the network in a crowded place and don't want everyone to have physical access to the device? Either way - ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won't even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.
The design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!
The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don't have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.
Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.

Description du produit
MikroTik cAP XL ac - borne d'accès sans fil - Wi-Fi 5
Type de périphérique
Borne d'accès sans fil
Format
Externe
Processeur
ARM IPQ4018 - 716 MHz
RAM
128 Mo
Mémoire flash
16 Mo
Protocole de liaison de données
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Bande de fréquence
2.4 GHz, 5 GHz
Accessoires inclus
Injecteur PoE, mounting screws, kit de montage au plafond
Prise en charge de l'alimentation sous Ethernet (PoE)
PoE
Dimensions (LxPxH)
19.1 cm x 19.1 cm x 4.2 cm
Type de périphérique
Borne d'accès sans fil
Largeur
19.1 cm
Profondeur
19.1 cm
Hauteur
4.2 cm
Processeurs installés
ARM IPQ4018 716 MHz
RAM
128 Mo
Mémoire flash
16 Mo
Format
Externe
Technologie de connectivité
Sans fil
Protocole de liaison de données
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Bande de fréquence
2.4 GHz, 5 GHz
Classification Wi-Fi
AC1200
Caractéristiques
Montage mural possible, fixation au plafond possible, bouton de mode
Normes de conformité
IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac
Antenne
Interne
Nombre d'antennes
2
Interfaces
1 x 1000Base-T (PoE) - RJ-45 ¦ 1 x 1000Base-T - RJ-45
Accessoires inclus
Injecteur PoE, mounting screws, kit de montage au plafond
Normes de conformité
IC, FCC, RoHS, EAC
Prise en charge de l'alimentation sous Ethernet (PoE)
PoE
Système d'exploitation fourni
MikroTik RouterOS (licence level 4)
Température minimale de fonctionnement
-40 °C
Température maximale de fonctionnement
70 °C