Marketing Beschreibung

The CATx Dual Computer Access Module (CAM) is a highly compact device that allows you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.
The module connects to the video, USB, audio and RS232 ports of your computer and then connects via Cat 5, 5e or 6 cabling to the AdderView CATx KVM switches and/or Adder extender receivers. Your video display, keyboard, mice and speakers are linked to the remote devices.

Hauptverkaufsargumente

• Absolute mouse mode support
• EDID display information
• User arbitration
• RS232 for disabling/re-enabling receiver connections

Produktfeatures

• Absolute mouse mode support
  It supports absolute mouse mode when used in conjunction with supporting equipment.
• EDID display information
  The module contains a default set of EDID information that supports display resolutions up to 1920 x 1200. In addition, the module will check during power up whether alternative EDID information is available from the KVM switch or extender that is connected to port A.
• Power
  The CATx Dual CAM uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation.
• User arbitration
  Control of the host computer is arbitrated by the module on a first come, first served basis. At the moment that a key is pressed or a mouse is moved by a user, the keyboard and mouse of the other user are temporarily locked-out. The keyboard indicators of the locked-out user then begin to flash to confirm their status. After two seconds of inactivity from the user currently in control, the module returns to its idle condition and re-instates the keyboard indicators of the locked-out user.
• RS232 for disabling/re-enabling receiver connections
  When required, a user of one remote link can disable the other remote link using serial port commands. From one of the remote keyboards, a terminal program on the computer can be used to send the appropriate character to the COM port that has been allocated to the module.